Need Help

Call our Customer Services department to assist you with finding the right supplies or accessories for your pad printer.

(800) 272-7764
 
 

About Our Inks

Our special inks are designed for challenging substrates to print, intended to dry quickly. Among their many applications are medical sensors, transistors, antennas and electrodes. The durability of our ink products is well known: they're weatherproof, waterproof, dishwasher proof, so your message will never fade. Class VI medical inks are available per request. Our textile inks certified for 50 washes, and feature color matching and adhesion testing.

 

Material Safety Data Sheets

Library of Material Safety Data Sheets for our inks, ink additives, cleaners, developers, primers, etc. View Safety Sheets

Inks > PLT6

PLT6 Acrylic-based one- or two-component ink

Characteristics PLT6 ink is a single-component series ink that can also be used as a two-component ink. This ink has a semi-glossy look and is quick to dry.
Applications Particularly suited for printing on rubber, and natural or synthetic textile fiber such as leather and imitation leather as well as polyamide. Good results are also obtained on polyurethane and polyamide.
Resistance Excellent mechanical and chemical resistance. If used as a two-component ink the mechanical and chemical resistance is excellent and increases its adhesion.
Flash Point Above 43 degrees C.
Preparation

Thin and mix well the PLT6 ink with PLTA Thinner in a portion of 10-20% max. In warm climates and in the presence of fine details or screened images the use of PLTD Retarder in a very small percentage is recommended. If the achievement of the major mechanical or chemical resistance or a higher adhesion is required, the ink can be used also as a two-component ink series. PLT6 can be mixed with hardener PLH in a ratio of 10 parts ink to 1 part hardener.
Pot Life

The life of the mixed ink is 8-10 hours after which the mechanical-chemical resistance and adhesion decreases. This is also dependent on room temperature and ratio of solvent.

An excessive dilution causes a loss of coverage, smudge and incomplete ink detachment from the pad. A poor dilution may cause problems withdrawing ink from the cliché obtaining a repetitive print quality and avoiding the "dripping" of the same ink with lower print quality.
Drying and Hardening

Generally the following drying times are applicable:
Hand drying at 68° F: Approx. 1-2 minutes 
Drying time can be accelerated by using ovens with circulating hot air or spot devices at high temperatures.
The final hardening of the ink is obtained after 24 hours.

Range of Colors PLT6 is available in 22 standard colors. Europa scale is available in transparent colors. PLT6 has a high light fastness equivalent to 7-8 rating DIN fastness. PLT6 inks are adjusted for printing with PLTA Thinner, PLTCAN Fast Thinner, and PLTD Retarder for printing fine detail.
Process Color Printing PLT6 inks are available in transparent colors PLT6 #180 Yellow, PLT6 #181 Magenta and PLT6 #182 Cyan.
Clean-up

PLTEBD recommended.
Storage

PLT6 has a shelf life of about 2 years. Storage containers should be sealed and placed in a cool dry place.

PLH hardener should not be stored for long periods. The cans should be closed immediately after use, otherwise the hardener will become thick and useless.
Additives PLH Hardener
PLTCAN Thinner (This is different from other inks).
PLTD Retarder