Need Help

Call our Customer Services department to assist you with finding the right supplies or accessories for your pad printer.

(800) 272-7764
 
 

About Our Inks

Our special inks are designed for challenging substrates to print, intended to dry quickly. Among their many applications are medical sensors, transistors, antennas and electrodes. The durability of our ink products is well known: they're weatherproof, waterproof, dishwasher proof, so your message will never fade. Class VI medical inks are available per request. Our textile inks certified for 50 washes, and feature color matching and adhesion testing.

 

Material Safety Data Sheets

Library of Material Safety Data Sheets for our inks, ink additives, cleaners, developers, primers, etc. View Safety Sheets

Inks > PLT15

PLT15 Acrylic-based one- or two-component ink

Characteristics PLT15 is a one- or two-component ink that has a high-gloss finish and is quick to dry with very good opacity and excellent coverage. 
Applications

Particularly suited for printing on PE-PP, PMMA, PS, ABS, SAN, PVC plasticized and rigid, PMMA, polypropylene, and polyethylene (pre-treated).
Resistance PLT15 has good resistance to alcohol, greases and petrol and hand perspiration.
Flash Point Above 43 degrees C.
Preparation

Thin and mix well with PLTA thinner in a portion of 10-20% maximum.

 In warm climates and in the presence of fine details or screened images, the use of PLTD retarder in a small percentage is recommended.

If used as a two-component ink, PLT15 can be mixed with PLH hardener in a ratio of 10 parts ink to 1 part hardener.
Pot Life

An excessive dilution causes a loss of coverage, smudges and incomplete ink detachment from the pad. A poor dilution may cause problems withdrawing ink from the clichx obtaining a repetitive print quality and avoiding the "dripping" of the same ink with lower print quality. If the achievement of the major mechanical or chemical resistance or higher adhesion is required, the ink can be used as a two-component ink. In this case mix the ink with PLH in a ratio of 10 parts ink to 1 part hardener.

The life of the two-component mixed ink is 8-10 hours depending on room temperature and ratio of solvent(s). 
Drying and Hardening

Generally the following drying times are applicable:
Hand drying at 68° F: Approx. 1-2 minutes
Curing at 68° F: Approx. 30 seconds
Hand drying at 175° F: Approx. 30 seconds
Curing at 175° F: Approx. 15 seconds
The final hardening of the ink is obtained after 5 days. 
Range of Colors PLT15 is available in 15 standard shades as well as 3 transparent, four-color process shades. PLT15 inks are adjusted for printing with PLTA Thinner, PLTCAN Fast Thinner, and PLTD Retarder for printing fine detail.
Process Color Printing PLT15 inks are available in transparent colors PLT15 #180 Yellow, PLT15#181 Magenta and PLT15 #182 Cyan.
Clean-up PLTEBD Cleaner is recommended. 
Storage

PLT15 has a shelf life of about 2 years. Storage containers should be sealed and placed in a cool dry place.

PLH hardener should not be stored for long periods. The cans should be closed immediately after use, otherwise the hardener will become thick and useless.
Additives

PLH Hardener
PLTA Thinner
PLTD Retarder